Are you are the owner of HP Laserjet Pro M102 Printer? Great! Lots
of congratulation for choosing such a great machine. In the blog, we will
describe some of its error codes that you might encounter after some time. For
proper guidance on the troubleshoots, connect with Hp Printer
Customer Support 1-855-536-5666 and
fix the issue upfront.
HP Laserjet Pro M10 Error Codes
Error Code 01:
Error Code 01 is one of the common issues which appears when the
printer encounters a fatal error. To overcome this issue, make sure to Press
and hold the cancel button until LED starts blinking. Thereafter proceed toward
secondary control panel light to find the description of the error.
Error Code 02:
Error code 002 pop up when there is an issue with the engine
section of the printer. It might be caused by the DCC or communication error.
Make sure to reboot the printer to settle this issue. If the error Persist,
remove the surge protector from the power line and then restart the machine
again.
Error Code: 03
Error Code 03 occurs when the printer deals with low voltage power
supply. Make sure to reboot the printer to settle this issue. If the error
Persist, remove the surge protector from the power line and then restart the
machine again.
Error Code: 04
This particular error code appears when the fuser unit in the
printer ends up inert. To cater to this issue, make sure to reboot the printer
in the following way. First turn off the printer and unplug its cable from the
power source. Now wait for the 30 seconds and plug the cable directly to the
power source then restart it again. Hope this will fix the error.
Error Code: 05
This Error Code represents the general engine error issue. To fix
this issue, first, switch off the printer and remove the surge protector from
its power line. Now wait for the 30 seconds and plug the cable directly to the
power source then restart it again. If this doesn’t fix the issue then make
sure connect with HP Printer
Customer Helpline. 1-855-536-5666
No comments:
Post a Comment